Mazda 323

since 1985 of release

Repair and car operation

Mazda 323

- Introduction
   About this Management
   Mazda-323 brand cars — the introduction
   Identification numbers of the car
   Acquisition of spare parts
   Technology of service, tools and workplace equipment
   Engine start from an auxiliary source
   Poddomkrachivaniye and towage
   Automobile himikaliya, oils and greasings
   Diagnostics of malfunctions
   Routine maintenance
   + Works on maintenance
   + Box transfers/drive of wheels
   + brakes/tyres/wheels
   + Steering management/drive of forward wheels
   + car Electric equipment
   + Body / internal equipment
+ Petrol engines
+ System of greasing of the engine
+ System of cooling of the engine
+ ignition System
+ Power supply system, carburetor, system of injection of fuel
+ Diesel engine
+ System of production of the fulfilled gases
+ Coupling
+ Manual transmission
+ Automatic transmission
+ Suspension bracket and steering system
+ Brake system
+ Wheels and tires, body, car coloring, care of the car
+ electric equipment System
+ Heater, lighting system, devices
+ Governing bodies and operation receptions
+ Electric circuits

Engine start from an auxiliary source


    At engine start from the auxiliary battery it is necessary to remember need of implementation of the following requirements:
      Before connection of the auxiliary battery make sure that ignition is switched off (a key will turn in the situation OFF). Make sure that all electric equipment of the car (lighting devices, a heater, screen wipers, etc.) is switched off. Surely put on goggles. Make sure that the auxiliary battery on target tension corresponds established on your car. If start is made from the battery established on other car, track, that between cars there was no common ground! Make sure that transmission is established on neutral transfer (RKPP), or to the situation "R" (Parking) (AT). If the auxiliary battery belongs to type of subjects to service, remove from it ventilating covers and cover openings with rags.
    Connect a red wire from a set for engine start from an auxiliary source between positive (+) plugs of both batteries. Then connect the second (black) wire from a set at first to the negative (-) the plug of the auxiliary battery, and then to well earthed point on your car (such as a bolt or an arm on the engine block, whenever possible within distance in 45 cm from the battery). Make sure that wires do not touch moving components of an impellent compartment (such as fan blades, driving belts, etc.).
    Start the engine from the auxiliary battery, then, having left it working at single turns, turn on the motor of the fan of a heater (for the maximum speed) or a heater of glass for smoothing of peaks of tension which can arise at a detachment of wires (do not turn on lighting devices as considerable power surges can lead to a peregoraniye of lamps). Disconnect wires, operating as it should be the return to an order of their connection.