Mazda 323

since 1985 of release

Repair and car operation



Mazda 323

+ Introduction
+ Petrol engines
+ System of greasing of the engine
+ System of cooling of the engine
+ ignition System
+ Power supply system, carburetor, system of injection of fuel
+ Diesel engine
+ System of production of the fulfilled gases
+ Coupling
+ Manual transmission
+ Automatic transmission
+ Suspension bracket and steering system
- Brake system
   Specifications of brake system
   Forward brake
   Removal and installation of forward brake shoes
   Check of thickness / lateral palpation of a brake disk
   Removal and installation of blocks of a back disk brake
   Removal and installation of a support of a brake
   Removal and installation of a brake disk
   Removal and installation of back brake blocks / brake drum
   Removal and installation of the wheel brake cylinder
   Repair of the wheel brake cylinder
   Brake liquid
   Pumping of brake system
   Replacement of brake pipelines and hoses
   Check of the brake amplifier
   Removal and installation of the switch of stoplights
   Hand brake
   Adjustment of the hand brake
   Anti-blocking system (ABS)
+ Wheels and tires, body, car coloring, care of the car
+ electric equipment System
+ Heater, lighting system, devices
+ Governing bodies and operation receptions
+ Electric circuits




Removal and installation of a brake disk

For ensuring uniform braking from both parties, both brake disks should have an identical surface. Therefore it is obligatory to replace both brake disks on one axis.

Cars to 9/89 g вып. and versatile person models: For removal of forward brake disks it is necessary to address in a workshop as this work demands dismantling of a nave and the press is respectively necessary, see. Head Suspension bracket and steering system.

At replacement of brake disks brake shoes should be replaced also.

Removal

 PERFORMANCE ORDER

    To remove a support of a brake and to suspend on a wire to a body with the connected brake hose.
    Cars to 9/89 g вып. and versatile person models: For removal of a back brake disk to straighten a lock plate by means of a hammer and a chisel and to weaken a nave nut.

On the left side the nut of a nave has the left carving, it for easing is necessary for rotating to the right (clockwise).

    To remove a brake disk.

Installation

 PERFORMANCE ORDER

    To clear new brake disks of a protective varnish by means of a nitrothinner. Cars to 9/89 g вып. and versatile person models: To rearrange the nave bearing in a new brake disk. To establish a back disk with the bearing and to adjust люфт the nave bearing, see. Head Suspension bracket and steering system. Cars from 10/89 g вып., except the versatile person model: To insert a brake disk and slightly to screw 2 nuts of a wheel, for fixing of a brake disk. To establish a brake support, see. Section Removal and installation of a support of a brake.