Mazda 323

since 1985 of release

Repair and car operation

Mazda 323

+ Introduction
+ Petrol engines
+ System of greasing of the engine
+ System of cooling of the engine
+ ignition System
- Power supply system, carburetor, system of injection of fuel
   Purity rules at work with a power supply system
   Removal and sensor installation/check in a fuel tank
   Removal and installation of a fuel tank
   Removal and installation of the fuel pump
   Removal and installation/check of the fuel pump
   Removal and installation of the air filter
   + Carburettor
   - System of injection of fuel
      System of injection of fuel
      Memory of malfunctions
      Security measures at work with injection system
      Idling check
      Verification of the contents WITH
      Check/adjustment of the sensor of a butterfly valve
      Removal and installation/check of the sensor of temperature of cooling liquid
      Check of gates of injection (injectors)
      Removal and installation of gates of injection
      Check of the fuel pump
+ Diesel engine
+ System of production of the fulfilled gases
+ Coupling
+ Manual transmission
+ Automatic transmission
+ Suspension bracket and steering system
+ Brake system
+ Wheels and tires, body, car coloring, care of the car
+ electric equipment System
+ Heater, lighting system, devices
+ Governing bodies and operation receptions
+ Electric circuits

анкета в финляндию на визу
магазин мечта

Memory of malfunctions

Failure and short-term malfunctions of sensors register in memory of malfunctions of a monitor. The written-down malfunctions can be считаны in workshops by means of the special device of self-diagnostics of MAZDA (SST 49H0189A1). The code of malfunction gives information on in what place of system of ignition or injection it is necessary to look for malfunction. The detailed verifying catalog is necessary for determination of concrete malfunction. Besides, the majority of checks use of special devices which, as a rule, are absent in a set of a house workshop demand. Therefore only some general instructions on check here are provided. Detailed check should be carried out in a specialized workshop.

The general instructions on check

If the device of self-diagnostics revealed malfunction, for example, the sensor of temperature of cooling liquid, malfunction can be also in a monitor. Malfunction can be determined either sensor replacement, or further detailed check by special devices (it is carried out in a workshop).

Workshops do not accept back bought, but unused details.


    To disconnect cables, to check reliability of contact of connections, to remove corrosion. To check fastening of cables. To check resistance of a faulty detail and to compare to demanded value. To check wires to a monitor on current course by means of an ohmmeter

At shutdown of the battery, malfunction in memory of a monitor are erased. If the same malfunctions appear at further operation, they again register in memory.