Mazda 323

since 1985 of release

Repair and car operation

Mazda 323

+ Introduction
+ Petrol engines
+ System of greasing of the engine
+ System of cooling of the engine
+ ignition System
+ Power supply system, carburetor, system of injection of fuel
+ Diesel engine
+ System of production of the fulfilled gases
- Coupling
   Removal and coupling installation/check
   Removal and installation/check of the vyzhimny bearing of coupling
   Adjustment of a pedal/cable of coupling
   Check/adjustment of a pedal of coupling
   Air removal from a coupling drive
+ Manual transmission
+ Automatic transmission
+ Suspension bracket and steering system
+ Brake system
+ Wheels and tires, body, car coloring, care of the car
+ electric equipment System
+ Heater, lighting system, devices
+ Governing bodies and operation receptions
+ Electric circuits


Coupling consists of a basket of coupling with the press disk, a conducted disk and drive system. Press and conducted disks are placed on a flywheel.

In the included condition press the disk presses a conducted disk under the influence of a diafragmenny spring to a flywheel and closes a kinematic chain between the engine and a transmission.

In a case of a transmission there is a fork of switching off of coupling. On it the bearing which at switching off of coupling nestles on a press disk fastens unattended vyzhimny.

Coupling drive on all petrol models with a forward drive to 9/89 g вып. and all models the versatile person is carried out through a cable. All-wheel drive and diesel options, and also all cars from 10/89 g вып. (except the versatile person) have a hydraulic drive of coupling. The piston of the working cylinder of hydraulic system adjoins to a fork of switching off of coupling. When squeezing a pedal of coupling through a piston rod in the main cylinder pressure which is transferred on the hydraulic pipeline on the working cylinder is created. The piston of the working cylinder through a fork presses vyzhimny the bearing to a spring of a press disk and takes away it a little. At the expense of it the conducted disk between a flywheel and a press disk is released, and the kinematic chain between the engine and a transmission is disconnected. The hydraulic system is filled with brake liquid which is filled in through the general compensatory tank (depending on model can be established and a separate tank).

Coupling from 10/89 g вып.

1 — a coupling pedal
2 — the main cylinder
3 — the working cylinder
4 — vyzhimny the bearing
5 — a fork of switching off of coupling

6 — a basket of coupling and press a disk
7 — a conducted disk
8 — the directing bearing
9 — a flywheel