Mazda 323

since 1985 of release

Repair and car operation

Mazda 323

- Introduction
   About this Management
   Mazda-323 brand cars — the introduction
   Identification numbers of the car
   Acquisition of spare parts
   Technology of service, tools and workplace equipment
   Engine start from an auxiliary source
   Poddomkrachivaniye and towage
   Automobile himikaliya, oils and greasings
   Diagnostics of malfunctions
   Routine maintenance
   + Works on maintenance
   + Box transfers/drive of wheels
   - Brakes/tyres/wheels
      Check of level of brake liquid
      Check of thickness of brake shoes
      Check of the parking brake
      Replacement of brake liquid
      Pressure check in tires
      Protector check
      Check of a zolotnik of the tire
   + Steering management/drive of forward wheels
   + car Electric equipment
   + Body / internal equipment
+ Petrol engines
+ System of greasing of the engine
+ System of cooling of the engine
+ ignition System
+ Power supply system, carburetor, system of injection of fuel
+ Diesel engine
+ System of production of the fulfilled gases
+ Coupling
+ Manual transmission
+ Automatic transmission
+ Suspension bracket and steering system
+ Brake system
+ Wheels and tires, body, car coloring, care of the car
+ electric equipment System
+ Heater, lighting system, devices
+ Governing bodies and operation receptions
+ Electric circuits

Check of level of brake liquid

The broad tank with brake liquid is in an impellent compartment. It has two chambers, on one on each brake contour. The cover has a ventilating opening which should not get littered.

The broad tank is made of a transparent material so level of brake liquid at any time can be checked outside. It is recommended to dart a glance at a broad tank regularly.

Level of liquid should lie, at the closed cover, not above the maximum mark and not below the minimum.

To fill in only brake liquid of the SAE J 1703 specification, DOTZ.

Because of wear of brake shoes level of brake liquid slightly falls. It is normal.

If level of brake liquid during a short period falls considerably, it is a sign of loss of brake liquid.

It is necessary to find a leak place at once. As a rule, it is on worn-out cuffs in wheel brake cylinders. For the purpose of safety it is necessary to make check in a specialized workshop.