Mazda 323

since 1985 of release

Repair and car operation



Mazda 323

+ Introduction
+ Petrol engines
+ System of greasing of the engine
+ System of cooling of the engine
+ ignition System
+ Power supply system, carburetor, system of injection of fuel
+ Diesel engine
+ System of production of the fulfilled gases
+ Coupling
+ Manual transmission
+ Automatic transmission
+ Suspension bracket and steering system
+ Brake system
+ Wheels and tires, body, car coloring, care of the car
+ electric equipment System
+ Heater, lighting system, devices
+ Governing bodies and operation receptions
- Electric circuits
   Corrected addresses with electric circuits
   Arrangement of tips central electricians
   Creation of electric circuits
   Relay arrangement
   + Model of 1987 вып.
   + Model of 1991 вып.






Electric circuits

Corrected addresses with electric circuits

If it is required to find malfunction in electric system or in addition to establish electric equipment, not to do without the scheme representing course of a current and cable connections. The corresponding contour of a current should be surely closed, differently the current will not proceed. For example, it is not enough, when tension is put to the plusovy plug of a headlight, and a contour on contact of weight will not close.

Therefore the cable of weight of the battery is connected to a body. However it is not enough this connection with weight, and the corresponding consumer has directly a wire of weight, whose isolation, as a rule, has black color. Switches, the relay, safety locks, measuring devices, electromotors or other electric elements can be built in separate contours of a current. To have possibility to connect these devices correctly, separate cables have different colors.

Colors of cables

Letters on separate conductors indicate color of a cable:

1 — a symbol (example)

2 — an one-color cable

3 — black

4 — a cable with strips

5 — white (color of a cable)

6 — red (color of a strip)

Single letters designate an one-color cable.

Example:

In — black. At two-colored cables the first letter indicates primary color of the cable, the second letter indicates color of a strip.

Example:

W/R designates a white cable with a red strip. The letter consisting by a row serves in brackets for designation of the corresponding cable plait.

Example:

(F) — a forward cable plait in the dashboard and in the right impellent compartment.

Color codes of cables

Code Color
L the dark blue
B the black
BR the brown
DL the dark blue
DG the dark green
G the green
GY the gray
LB the light gray
LG the light green
N the beige
O the orange
P the pink
R the red
PU the purple
T the beige
W the white
Y the yellow
V the violet

Symbols of tips

Tips and nests are designated on the scheme as follows:

Identical tips are connected on the scheme by the shaped line. The tip without color designation colourless or white. Nests which are not used, are designated by an asterisk (*).

Weight connections

Weight connections on the scheme, as a rule, are below.

If connection of weight is carried out by a cable, the point of weight is designated by number. If connection of weight is carried out directly through a body, it is designated on the scheme by the painted-over point.

Reductions on schemes

A amperes
ABS anti-blocking system
ACC additional equipment
A/C conditioner
A/T automatic transmission
ALT generator
B battery
B/L top a part/compartment for feet
CPU electronic monitor
CCT switching contour
COMBI комби
DEF razmorazhivatel
DIESEL cars with the diesel engine
ECU monitor engine
EGI electronic system of injection
EGR return of the fulfilled gases
ELEC the electric
F in front
FL in front at the left
FR in front on the right
F/B management
F/I injection gate
GEN generator
H/D heater / размораживатель
HEAT heater
HI driving beam
IG ignition
ILLUMI lighting
INT drive with intervals
J/B box of safety locks
LH at the left
LO passing beam
M/T mechanical transmission
NC (zamykatel) is normally closed
NO (breaker) is normally opened
OFF it is switched off
ON it is included
P/S servoupravleniye
R behind
RH on the right
RL behind at the left
RPM rpm = revolutions per minute
RR behind on the right
SQ square millimeters
SW switch
TEMP temperature
V volts
VOL volumes
W watts