Mazda 323

since 1985 of release

Repair and car operation



Mazda 323

+ Introduction
+ Petrol engines
+ System of greasing of the engine
+ System of cooling of the engine
+ ignition System
+ Power supply system, carburetor, system of injection of fuel
+ Diesel engine
+ System of production of the fulfilled gases
+ Coupling
+ Manual transmission
+ Automatic transmission
+ Suspension bracket and steering system
+ Brake system
- Wheels and tires, body, car coloring, care of the car
   The sizes of disks and tires/pressure in tires
   Designations of disks
   Designations of tires
   Replacement of wheels
   Rules of care of tires
   Balancing of wheels
   Antisliding chains
   Spare wheel
   Wear of tires
   Body
   Removal and installation of a front bumper
   Removal and installation of a rear bumper
   Removal and front grille installation
   Removal and installation of lateral moldings
   Removal and installation of a forward wing
   Removal and cowl installation/adjustment
   Removal and installation/adjustment of a door of a back
   Removal and door installation/adjustment
   Upholstery door door/window regulator/glass
   Removal and installation of an upholstery of a door
   Removal and installation of a glass/window regulator of a forward door
   Lock/handle/cylinder of the lock of a door
   Lock of a door of a back / internal drive
   External mirror
   Removal and installation of glass of a mirror
   Panel of devices / average console
   Forward seats
   Removal and installation of a back seat
   Back seat
   Car coloring
   Elimination of damages from stones
   Rikhtovka body/repair of rusty openings
   Preparation for painting
   Coloring
   Wash of the car
   Care of a varnish covering
   Protection of the bottom and preservation of cavities
   Care of an upholstery
+ electric equipment System
+ Heater, lighting system, devices
+ Governing bodies and operation receptions
+ Electric circuits



Lancia Musa - про автомобиль Lancia Musa

Wheels and tires, body, car coloring, care of the car

The sizes of disks and tires/pressure in tires

The equipment constantly develops. Can be so that for older models other values of pressure in tires are admissible. Therefore it is recommended to learn the last data in specialized workshops.

 Cars to 9/89 g вып. and all versatile person models

engine/model size of tires pressure in tires in the Bar
Polovinny loading Full load
in front behind in front behind
1,1 - л/1,3 - л/1,5 - l - petrol 155 R 13 S
175/70 R 13 S
175/70 R 13 82 R
155 R 13 M+S
2,0 1,8 2,0 1,9
1,6 l without a turbonagnetatel. with the catalyst 175/70 R 13 S
175/70 R 13 82 S
175/70 HR 13
175/70 R 13 82 H
1,9 1,8 2,0 1,8
1,6 l without a turbonagnetatel, without the catalyst 175/70 HR 13
175/70 R 13 82 H
185/60 R 14 82 H
155 R 13 M+S
2,0 1,8 2,0 1,8
1,6 l of a turbo 185/60 VR 14
175/65 14 M+S
2,0 1,8 2,0 1,8
full drive 185/60 VR 14
175/65 R 14 M+S
2,0 1,8 2,2 2,0

Cars from 10/89 g вып., except the versatile person models
size of tires pressure in tires in the Bar
Polovinny loading Full load
in front behind in front behind
155 SR 13 78 S
155/80 R 13 78 S
175/70 R 13 82 S
155 R 13 M+S
2,0 1,8 2,2
full drive: 2, 3
2,0
full drive: 2,3
175/70 R 13 82 H 2,1
full drive: 2,0
1,9
full drive: 1,8
2,3 2,1
full drive: 2,3
185/60 R 14 82 H 2,1 1,9 2,2 2,1
175/65 R 14 M+S 2,2 2,0 2,4 2,4

    All these pressure belong to cold tires. Increasing at a long trip on 0,2 Bar pressure not to pit. Pressure of the tire of a spare wheel of the normal size corresponds to the maximum pressure of tires at a full load. Winter tires as a rule have pressure upon 0,2-0,3 Bar higher. It is necessary to consider recommendations of manufacturers of winter tires. As winter tires have restriction till speed, in sight of the driver the plate with the indication of the maximum speed should be strengthened.

MAZDA 323 depending on model and equipment can have tires and disks of the various sizes. However, application of wheels with depth of a press fitting of 45 mm is allowed. Depth of a press fitting — this distance from the rim middle to a persistent surface of a wheel on a brake disk or a drum. All disks represent so-called hamp-disks. Hamp is a fillet pressed in a shoulder of a rim which prevents at abrupt turn an otzhimaniye of the tubeless tire from a disk. At installation of wheels or the tires which have not been specified in documents, it is necessary to bring them in documents on the car. For this purpose, as a rule, MAZDA firm permission is required.

On the basis of rules depth of a protector of the tire should not be less than 1,6 mm, namely, the profile should have depth not less than 1,6 mm on all surface. However, it is recommended to maintain for the purpose of safety summer tires to depth of a profile of 2 mm, and winter tires — to depth of a profile of 4 mm.