Mazda 323

since 1985 of release

Repair and car operation



Mazda 323

- Introduction
   About this Management
   Mazda-323 brand cars — the introduction
   Identification numbers of the car
   Acquisition of spare parts
   Technology of service, tools and workplace equipment
   Engine start from an auxiliary source
   Poddomkrachivaniye and towage
   Automobile himikaliya, oils and greasings
   Diagnostics of malfunctions
   Routine maintenance
   + Works on maintenance
   + Box transfers/drive of wheels
   + brakes/tyres/wheels
   - Steering management/drive of forward wheels
      Check of boots of tips of steering drafts / spherical support
      Check люфта steering
      Check of level of cервоуправления oil
   + car Electric equipment
   + Body / internal equipment
+ Petrol engines
+ System of greasing of the engine
+ System of cooling of the engine
+ ignition System
+ Power supply system, carburetor, system of injection of fuel
+ Diesel engine
+ System of production of the fulfilled gases
+ Coupling
+ Manual transmission
+ Automatic transmission
+ Suspension bracket and steering system
+ Brake system
+ Wheels and tires, body, car coloring, care of the car
+ electric equipment System
+ Heater, lighting system, devices
+ Governing bodies and operation receptions
+ Electric circuits






Check of level of cервоуправления oil

Worn-out details:

  • ATF Dexron - II.

Check

Level of oil of the steering amplifier should be checked on a compensatory tank at the switched-off engine.

To 9/89 g вып. and all versatile person models

 PERFORMANCE ORDER

  1. To unscrew a tank cover. To wipe a measuring core a pure rag.
  1. Again to establish a tank cover, without screwing, to Uncover and measure level. Level of oil should be between marks of "H" and "L".

From 10/89 g вып.

 PERFORMANCE ORDER

  1. Oil level should be in a compensatory tank between marks of "F" and "L".
  2. Otherwise to add hydraulic oil. To use thus only Dexron - II.
  3. It is obligatory to add only fresh oil as even insignificant pollution can result in malfunctions in work of hydraulic system.
  4. After filling to turn several times a steering wheel from an emphasis against the stop at the working engine, at the expense of it from system air is removed.
  5. If it is necessary to add oil, it is necessary to check tightness of system of a steering.