Mazda 323
+ Introduction
+ Petrol engines
+ System of greasing of the engine
+ System of cooling of the engine
+ ignition System
- Power supply system, carburetor, system of injection of fuel
Purity rules at work with a power supply system
Removal and sensor installation/check in a fuel tank
Removal and installation of a fuel tank
Removal and installation of the fuel pump
Removal and installation/check of the fuel pump
Removal and installation of the air filter
+ Carburettor
+ System of injection of fuel
+ Diesel engine
+ System of production of the fulfilled gases
+ Coupling
+ Manual transmission
+ Automatic transmission
+ Suspension bracket and steering system
+ Brake system
+ Wheels and tires, body, car coloring, care of the car
+ electric equipment System
+ Heater, lighting system, devices
+ Governing bodies and operation receptions
+ Electric circuits
|
Removal and installation of the air filter Carburetor engine
Removal
|
|
|
|
To weaken brackets of fastening and to unscrew a lambskin nut. To uncover the air filter.
|
To take out filtering element.
To disconnect from the case of the air filter a preheating hose.
To disconnect vacuum hoses and a hose of ventilation of a case. For simplification of installation to mark hoses with a sticky tape.
To unscrew bolts of fastening of the lower part of the air filter. To remove the lower part of the filter.
To close the carburetor a pure rag. | Not to allow falling of details in the carburetor as it can cause serious damages of the engine. |
|
|
Installation
|
|
To remove a rag.
To check a preheating hose on existence of damages, if necessary to replace.
To put on a preheating hose the case of the air filter. To watch, that the union correctly entered into a hose of preheating and was not compressed or damaged.
To connect to the air filter vacuum hoses and a hose of ventilation of a case according to marking.
To establish and screw the lower part of the air filter.
To insert filtering element.
To establish a cover of the air filter, to screw a lambskin nut and to fix fastening brackets.
|
|
Injector engine
Removal
|
|
To disconnect the tip from a measuring instrument of weight of air.
|
|
If is available, to disconnect a cable of a high voltage-1-and connections on the ignition coil. For simplification of installation to mark cables with a sticky tape.
|
To weaken shlangovy collars and to disconnect a hose-2-soaked up air.
To turn out bolts of fastening-3-top parts of the air filter.
|
|
To turn out bolts of fastening-4-and to take out the lower part of the air filter.
|
|
|
Installation
|
|
To establish the lower part of the air filter and to tighten bolts.
To enclose filtering element.
To establish the top part of the air filter and to tighten fastening bolts.
To put on a hose of soaked-up air on the top part of the air filter and to fix a collar.
To connect a cable of a high voltage and connection of the coil of ignition according to marking.
To connect the tip of a potentiometer of a butterfly valve.
|
|
Diesel engine
Removal
|
|
To weaken shlangovy collars and to disconnect a hose of soaked-up air.
|
|
To weaken bolts of fastening-5-and to remove the top part of the air filter-1-.
|
To take out filtering element-2-.
To disconnect a hose of ventilation of a case-6-, previously having weakened a collar.
To unscrew bolts of fastening-4-and to remove the lower part of the air filter-3-.
|
|
Installation
|
|
To establish the lower part of the air filter and to tighten fastening bolts with effort of 25 Nanometers.
To connect a hose of ventilation of a case to the case of the air filter and to fix a collar.
To insert filtering element.
To establish the top part of the air filter and to screw fastening bolts.
To connect a hose of soaked-up air and to fix a collar.
|
|
|
|