Mazda 323

since 1985 of release

Repair and car operation



Mazda 323

+ Introduction
+ Petrol engines
+ System of greasing of the engine
+ System of cooling of the engine
+ ignition System
+ Power supply system, carburetor, system of injection of fuel
+ Diesel engine
+ System of production of the fulfilled gases
+ Coupling
+ Manual transmission
+ Automatic transmission
+ Suspension bracket and steering system
+ Brake system
+ Wheels and tires, body, car coloring, care of the car
+ electric equipment System
+ Heater, lighting system, devices
- Governing bodies and operation receptions
   Before landing in the car
   Running in
   Keys
   Locks of doors
   The uniform (central) locking device (if is available)
   Protection against pranks of children (if is available, only on back doors)
   Electric window regulator (if is available)
   Back rotary glasses (on 3-door models)
   Seats
   Adjustment of height of a steering wheel (if is available)
   Seat belts (if is available)
   Door back/trunk lid
   Fuelling
   Mirrors
   Luggage belts
   Trunk lid (if is available)
   Spare wheel
   Dashboard
   + Steering wheel and gear shifting
+ Electric circuits






Spare wheel

 

The spare wheel depending on need can be placed or in standing or lying situation.

Spare wheel in standing situation:

  1. Cast away a cover of a spare wheel to a back of a back seat.
  2. Establish a wheel and fix it belts.

Check, that the back of a back seat was correctly fixed, at placement of a spare wheel in standing situation that in case of emergency braking or failure there was no additional danger.

Hatchback

The spare wheel, jack, the handle of a jack and tools are placed in a luggage compartment.

That the jack, the handle of a jack and tools did not knock at movement, they should be correctly fixed.

Tool box

The tool box is on the right side of a luggage compartment.

Versatile person

The jack, the handle of a jack and tools are placed in a luggage carrier.

Vynimaniye of a jack

That the jack, the handle of a jack and tools did not knock at movement, they should be correctly fixed.


The jack is in a box on the right side. Open a cover and weaken tightening a bolt to take out a jack.

Vynimaniye of a spare wheel from fastening

 PERFORMANCE ORDER

  1. Open a back door.
  1. Remove a cap of a bolt of fastening. Compress cap brackets in the arrow direction, and extend a cap.

Turn a bolt a key for wheel nuts on 30-35 turns to the left.

Press fastening of a spare wheel up and delay brackets back to unhook fastening. Strongly hold fastening of a spare wheel, pressing a clamp forward.

If to release fastening of a spare wheel, the wheel can jump out.

Fixing of a spare wheel in fastening

 PERFORMANCE ORDER

  1. Correctly enclose a spare wheel in the fastening center.

If the spare wheel is incorrectly established in fastening, fastening will be incorrectly fixed. Even if it is possible to establish fastening, there is a danger that the wheel will fall at movement.


  1. Fix a spare wheel in sequence, return to removal.