Mazda 323

since 1985 of release

Repair and car operation



Mazda 323

+ Introduction
+ Petrol engines
- System of greasing of the engine
   Oil contour
   Check of pressure of oil
   Check of the sensor of pressure of oil
   Removal and installation of the pallet of a case
+ System of cooling of the engine
+ ignition System
+ Power supply system, carburetor, system of injection of fuel
+ Diesel engine
+ System of production of the fulfilled gases
+ Coupling
+ Manual transmission
+ Automatic transmission
+ Suspension bracket and steering system
+ Brake system
+ Wheels and tires, body, car coloring, care of the car
+ electric equipment System
+ Heater, lighting system, devices
+ Governing bodies and operation receptions
+ Electric circuits






Oil contour

All MAZDA 323 engines are equipped with so-called circulating system of greasing. The oil pump подсасывает oil from the case pallet also submits it to the main oil filter. On the delivery party of the oil pump there is a reduktsionny valve. At too high pressure of oil the valve opens, and the part of oil can flow down in the case pallet. Through the middle of the boss of the filter the cleared oil arrives to the trunk oil main. There is a sensor of pressure of oil which signals the driver about insufficient pressure of oil. At a contamination of the oil filter perepuskny the valve submits oil directly to the trunk oil main, passing the filter. The diesel engine in addition to the basic can have still perepuskny the oil filter. Thus the part of a stream of oil branches off and passes through the filter. From there the cleared oil flows down back in the case pallet.

Channels depart from the trunk oil main for greasing of bearings of the crankshaft. Through slanting openings in the crankshaft oil moves on shatunny bearings. At the same time on ascending oil pipelines oil arrives in a head of cylinders and greases bearings of a cam-shaft, a yoke and the ends of cores of valves. Some MAZDA 323 models for the best heat removal are equipped the in addition maslookhladitely. Thus oil after course of the filter passes through a maslookhladitel with water cooling.