Mazda 323

since 1985 of release

Repair and car operation

Mazda 323

+ Introduction
+ Petrol engines
- System of greasing of the engine
   Oil contour
   Check of pressure of oil
   Check of the sensor of pressure of oil
   Removal and installation of the pallet of a case
+ System of cooling of the engine
+ ignition System
+ Power supply system, carburetor, system of injection of fuel
+ Diesel engine
+ System of production of the fulfilled gases
+ Coupling
+ Manual transmission
+ Automatic transmission
+ Suspension bracket and steering system
+ Brake system
+ Wheels and tires, body, car coloring, care of the car
+ electric equipment System
+ Heater, lighting system, devices
+ Governing bodies and operation receptions
+ Electric circuits

Check of the sensor of pressure of oil


    The sensor of pressure of oil should be checked, if the control lamp on an instrument guard does not burn or burns constantly. If the lamp burns constantly, at first it is necessary to check pressure of oil. If pressure in norm, is necessary to make the following check.
    To muffle the engine and to disconnect the Y/R tip from the sensor of pressure of oil. To start the engine and to close the Y/R tip on weight. If the control lamp lights up, it is necessary to replace the sensor. If the lamp does not light up, or the lamp is faulty, or in wires there is a break, to check conducting according to the scheme. To connect an electric cable to the sensor of pressure of oil.