Mazda 323

since 1985 of release

Repair and car operation

Mazda 323

+ Introduction
+ Petrol engines
+ System of greasing of the engine
+ System of cooling of the engine
- Ignition system
   Security measures at work with electronic system of ignition
   Check of the coil of ignition
   Check of a cable of ignition
   Check/adjustment of the moment of ignition
   Removal and installation of the distributor of ignition
   Spark plugs
   Candles for MAZDA 323
+ Power supply system, carburetor, system of injection of fuel
+ Diesel engine
+ System of production of the fulfilled gases
+ Coupling
+ Manual transmission
+ Automatic transmission
+ Suspension bracket and steering system
+ Brake system
+ Wheels and tires, body, car coloring, care of the car
+ electric equipment System
+ Heater, lighting system, devices
+ Governing bodies and operation receptions
+ Electric circuits

Check of a cable of ignition


    Too big resistance of a cable of ignition can cause difficulties at start and ignition interruption. To switch off ignition. To remove an ignition cable, for this purpose to remove tips on the distributor and a candle.

Thus to pull for the tip, instead of for a cable.

    To check resistance between contact of the tip of a cover of the distributor and contact of a tip of a candle. Resistance should be equal 16 kiloohms on meter.
    At too high resistance to clear tips and to repeat measurement, if necessary to replace a cable. To bend ignition wires in the field of tips of candles and to check on existence of cracks, if necessary to replace all cables of ignition. To connect tips of candles and ignition cables.