Mazda 323

since 1985 of release

Repair and car operation



Mazda 323

+ Introduction
+ Petrol engines
+ System of greasing of the engine
+ System of cooling of the engine
+ ignition System
+ Power supply system, carburetor, system of injection of fuel
+ Diesel engine
+ System of production of the fulfilled gases
+ Coupling
+ Manual transmission
+ Automatic transmission
+ Suspension bracket and steering system
+ Brake system
+ Wheels and tires, body, car coloring, care of the car
+ electric equipment System
- Heater, lighting system, devices
   Heater
   Fan motor
   Removal and installation of the fan of a heater
   Control unit heater
   Adjustment of drives of a heater
   Check of the motor of fans/preresistors
   Check of the switch of a heater
   Lighting system
   Table of lamps
   Replacement of lamps of external lighting
   Headlight
   Removal and headlight installation
   Adjustment of headlights
   Removal and installation of back lamps
   Devices
   Instrument guard
   Removal and installation of an instrument guard
   Devices
   Removal and radio receiver installation
   Removal and installation of loudspeakers
   Removal and installation of the shtyrevy aerial
   Replacement of brushes of screen wipers
   Removal and installation/adjustment snuffled a stekloomyvatel
   Removal and installation of levers of a forward screen wiper
   Forward screen wiper
   Removal and installation of the motor of a forward screen wiper
   Back screen wiper
   Removal and installation of the motor of a back screen wiper
   Removal and installation of the lever of a back screen wiper
+ Governing bodies and operation receptions
+ Electric circuits






Removal and installation of the fan of a heater

From 10/89 g вып.

Removal

 PERFORMANCE ORDER

  1. To disconnect a weight cable from the battery.

Data from memory of malfunctions of the engine or protective code of a radio receiver are thus erased. Before shutdown of the battery it is necessary to read instructions in the Section Removal and battery installation.

  1. To remove a glove compartment, see. Head of the Wheel and the tire, a body, car coloring, care of the car, Undressed the Panel of devices / the average console.
  2. To unscrew the fan-2-case.
  3. To weaken a bracket of fastening and to take out a sealing plate-1-together with the fan block.
  4. To disassemble the block of the fan or to unscrew preresistors.

Installation

 PERFORMANCE ORDER

  1. To establish and screw the fan.
  2. To compress a sealing plate and to fix a fastening bracket.
  3. To connect a weight cable to the battery.
  4. If are available, to establish time on hours and to set a protective code of a radio receiver.

With 9/85 on 9/89 g вып.

 PERFORMANCE ORDER

  1. To disconnect a weight cable from the battery.

Data from memory of malfunctions of the engine or protective code of a radio receiver are thus erased. Before shutdown of the battery it is necessary to read instructions in the Section Removal and battery installation.

  1. To remove facing in the bottom of the dashboard.
  2. To remove a glove compartment, see. Head of the Wheel and the tire, a body, car coloring, care of the car, Undressed the Panel of devices / the average console.
  3. To remove the black steel holder in the top part of a glove compartment.
  4. To remove the air channel between a box of a heater and the fan block.
  5. To unscrew 3 nuts of fastening of the case of the fan.
  6. To remove a cable of an inlet air zaslonka.
  1. To disconnect the multicontact tip.
  1. To take out the fan.

Installation

 PERFORMANCE ORDER

  1. To establish and screw the fan.
  2. To connect the multicontact tip.
  3. To establish a cable of an inlet air zaslonka.
  4. To put on the air channel.
  5. To establish the steel holder in a glove compartment.
  6. To establish a glove compartment.
  7. To establish the bottom facing.
  8. To connect a weight cable to the battery.
  9. If are available, to establish time on hours and to set a protective code of a radio receiver.