Mazda 323

since 1985 of release

Repair and car operation



Mazda 323

+ Introduction
+ Petrol engines
+ System of greasing of the engine
- System of cooling of the engine
   Contour of cooling liquid
   Antifrizny concentrate
   Replacement of cooling liquid
   Check of tightness of system of cooling
   Removal and thermostat installation/check
   Removal and installation of the water pump
   Removal and radiator installation
   Removal and installation of the motor of the fan
   Thermoswitch check
+ ignition System
+ Power supply system, carburetor, system of injection of fuel
+ Diesel engine
+ System of production of the fulfilled gases
+ Coupling
+ Manual transmission
+ Automatic transmission
+ Suspension bracket and steering system
+ Brake system
+ Wheels and tires, body, car coloring, care of the car
+ electric equipment System
+ Heater, lighting system, devices
+ Governing bodies and operation receptions
+ Electric circuits






Removal and installation of the motor of the fan

Removal

 PERFORMANCE ORDER

  1. To disconnect a weight cable from the battery.

Data from memory of malfunctions of the engine or protective code of a radio receiver are thus erased. Before shutdown of the battery it is necessary to read instructions in the Section Removal and battery installation.

  1. To disconnect the fan tip.
  2. To unscrew bolts of fastening of the holder of the fan on a radiator.
  3. To incline the fan motor with the holder back and to take out up.
  4. Holding a krylchatka, to unscrew the central bolt of the fan on the motor.
  5. To unscrew bolts of fastening and to remove the motor from the holder.

Installation

 PERFORMANCE ORDER

  1. To screw the fan motor on the holder.
  2. To screw a krylchatka on the motor.

fan motor

  1. To screw the motor with the holder on a radiator with effort of 10 Nanometers.
  1. To connect the tip.
  2. To connect a cable of weight of the battery.
  3. If are available, to establish time on hours and to set a protective code of a radio receiver.
  4. To check work. For this purpose to warm up the engine that the fan turned on.