Mazda 323
+ Introduction
+ Petrol engines
+ System of greasing of the engine
+ System of cooling of the engine
+ ignition System
+ Power supply system, carburetor, system of injection of fuel
- Diesel engine
Principle of operation of the diesel engine
Removal and installation gear belt/adjustment of a drive of the distributive mechanism
System of preheat of the diesel engine
Check of system of preheat
Air removal from a power supply system
Check/replacement of the electromagnetic valve of interruption of supply of fuel
Adjustment of a drive of gas
Check/adjustment of number of turns of idling
Removal and installation of nozzles
Removal and installation of the vacuum pump
+ System of production of the fulfilled gases
+ Coupling
+ Manual transmission
+ Automatic transmission
+ Suspension bracket and steering system
+ Brake system
+ Wheels and tires, body, car coloring, care of the car
+ electric equipment System
+ Heater, lighting system, devices
+ Governing bodies and operation receptions
+ Electric circuits
|
Adjustment of a drive of gas
|
|
Before adjustment of a drive of gas it is necessary to check number of turns of idling.
The engine should be heated-up to normal working temperature. | Gas cable very fragile and at installation with it it is necessary to address especially carefully. Even the insignificant bend can lead to cable break in use. Cables which were bent, should not be established. |
|
|
To ask the assistant to squeeze out completely a gas pedal (the provision of full gas), or to fix in this situation, having established between a seat and a pedal wooden whetstone.
|
In the provision of full gas to adjust a cable on a countersupport by means of a lock-nut so that the TNVD lever adjoined without tension to the maximum emphasis.
To release a gas pedal, the TNVD lever should adjoin to an idling emphasis now.
|
|
|
|
