Mazda 323

since 1985 of release

Repair and car operation



Mazda 323

- Introduction
   About this Management
   Mazda-323 brand cars — the introduction
   Identification numbers of the car
   Acquisition of spare parts
   Technology of service, tools and workplace equipment
   Engine start from an auxiliary source
   Poddomkrachivaniye and towage
   Automobile himikaliya, oils and greasings
   Diagnostics of malfunctions
   Routine maintenance
   + Works on maintenance
   - Box transfers/drive of wheels
      Visual check of tightness
      Mechanical transmission: Check of level of oil
      Mechanical transmission: Oil replacement
      Automatic transmission: Check of level of oil
      Box of differential and transfer case: Check of level of oil
      Box of differential and transfer case: Oil replacement
      Check of rubber cuffs of power shafts
      Check of level of liquid of a drive of coupling
      Check/adjustment of a pedal of coupling
   + brakes/tyres/wheels
   + Steering management/drive of forward wheels
   + car Electric equipment
   + Body / internal equipment
+ Petrol engines
+ System of greasing of the engine
+ System of cooling of the engine
+ ignition System
+ Power supply system, carburetor, system of injection of fuel
+ Diesel engine
+ System of production of the fulfilled gases
+ Coupling
+ Manual transmission
+ Automatic transmission
+ Suspension bracket and steering system
+ Brake system
+ Wheels and tires, body, car coloring, care of the car
+ electric equipment System
+ Heater, lighting system, devices
+ Governing bodies and operation receptions
+ Electric circuits






Visual check of tightness

 PERFORMANCE ORDER

  1. The following places of leak are possible:
  2. Junction of the block of cylinders and transmission (laying transmission flywheel/epiploon).
  3. Junction of half of a case of a transmission.
  4. Maslonalivna bolt / маслосливной bolt.
  5. Power shaft on a transmission.
  6. By search of places of leak to operate as follows.
  7. To clear a transmission case a cold cleaner.
  8. To check oil level, if necessary to add.
  9. To powder possible places of leak with talc or lime.
  10. To make a trial trip. That oil was more liquid, the trial trip should be made on distance of 30 km.
  11. Then to lift the car and to check a transfer box on leak places by means of a lamp.
  12. To eliminate leak places.