Mazda 323

since 1985 of release

Repair and car operation


Mazda 323

- Introduction
   About this Management
   Mazda-323 brand cars — the introduction
   Identification numbers of the car
   Acquisition of spare parts
   Technology of service, tools and workplace equipment
   Engine start from an auxiliary source
   Poddomkrachivaniye and towage
   Automobile himikaliya, oils and greasings
   Diagnostics of malfunctions
   Routine maintenance
   + Works on maintenance
   - Box transfers/drive of wheels
      Visual check of tightness
      Mechanical transmission: Check of level of oil
      Mechanical transmission: Oil replacement
      Automatic transmission: Check of level of oil
      Box of differential and transfer case: Check of level of oil
      Box of differential and transfer case: Oil replacement
      Check of rubber cuffs of power shafts
      Check of level of liquid of a drive of coupling
      Check/adjustment of a pedal of coupling
   + brakes/tyres/wheels
   + Steering management/drive of forward wheels
   + car Electric equipment
   + Body / internal equipment
+ Petrol engines
+ System of greasing of the engine
+ System of cooling of the engine
+ ignition System
+ Power supply system, carburetor, system of injection of fuel
+ Diesel engine
+ System of production of the fulfilled gases
+ Coupling
+ Manual transmission
+ Automatic transmission
+ Suspension bracket and steering system
+ Brake system
+ Wheels and tires, body, car coloring, care of the car
+ electric equipment System
+ Heater, lighting system, devices
+ Governing bodies and operation receptions
+ Electric circuits



Box of differential and transfer case: Check of level of oil

On cars with a full drive it is necessary to check oil level in a box of differential and in a transfer case. The following spare details are necessary:

    Laying of a maslozalivny stopper. Transmission oil according to the specification: temperatures are higher - 18°С: API GL - 5 SAE 90; temperatures are lower - 18°С: API GL - 5 SAE 80.

Check

Transfer case

 PERFORMANCE ORDER

    To lift the car in horizontal situation. If is available, to remove an engine and transmission guard. To make visual check of tightness of a transfer case. To turn out maslozalivny a bolt - In-. To insert a finger into an opening and to check oil level. Level of oil should be at height of a jellied opening. If necessary to add oil through an opening. To establish maslozalivny a bolt with new laying and to tighten with effort of 55 Nanometers. If is available, to establish an engine and transmission guard. To lower the car.

Back differential

 PERFORMANCE ORDER

    To lift the car in horizontal situation. To check tightness of the back bridge.
    To turn out a maslozalivny stopper - In-.
    To insert a finger into an opening and to check oil level. Level of oil should be at height of a jellied opening. If necessary to add oil through an opening. To establish maslozalivny a bolt with new laying and to tighten with effort of 55 Nanometers. To lower the car.