Mazda 323

since 1985 of release

Repair and car operation



Mazda 323

- Introduction
   About this Management
   Mazda-323 brand cars — the introduction
   Identification numbers of the car
   Acquisition of spare parts
   Technology of service, tools and workplace equipment
   Engine start from an auxiliary source
   Poddomkrachivaniye and towage
   Automobile himikaliya, oils and greasings
   Diagnostics of malfunctions
   Routine maintenance
   + Works on maintenance
   - Box transfers/drive of wheels
      Visual check of tightness
      Mechanical transmission: Check of level of oil
      Mechanical transmission: Oil replacement
      Automatic transmission: Check of level of oil
      Box of differential and transfer case: Check of level of oil
      Box of differential and transfer case: Oil replacement
      Check of rubber cuffs of power shafts
      Check of level of liquid of a drive of coupling
      Check/adjustment of a pedal of coupling
   + brakes/tyres/wheels
   + Steering management/drive of forward wheels
   + car Electric equipment
   + Body / internal equipment
+ Petrol engines
+ System of greasing of the engine
+ System of cooling of the engine
+ ignition System
+ Power supply system, carburetor, system of injection of fuel
+ Diesel engine
+ System of production of the fulfilled gases
+ Coupling
+ Manual transmission
+ Automatic transmission
+ Suspension bracket and steering system
+ Brake system
+ Wheels and tires, body, car coloring, care of the car
+ electric equipment System
+ Heater, lighting system, devices
+ Governing bodies and operation receptions
+ Electric circuits






Mechanical transmission: Check of level of oil

The following details will be necessary:

  • All-wheel drive cars: laying of a verifying stopper.
  • Transmission oil according to the specification:
    • Cars to 9/89 g вып.: the temperature is higher - 18°С: API GL - 4 or GL - 5 SAE 90 or 80 W - 90, temperature is lower - 18°С: ATF Dexron - II.
    • Cars from 10/89 g вып.: API GL - 4 or GL - 5 75 W - 90 or ATF Dexron - II (BP DOHC: only ATF Dexron - II).

Check

Front-wheel cars

 PERFORMANCE ORDER

  1. To unscrew a bolt of fastening of a gear wheel of a shaft of a speedometer on a transmission.
  2. To take out a gear wheel together with speedometer shaft from a transmission case.
  3. To wipe a gear wheel a pure rag and again to insert it.
  1. To take out a gear wheel of a shaft of a speedometer and to consider indications of level of oil. It should be between labels of F and L.
  1. To insert a gear wheel of a shaft of a speedometer and to tighten a fastening bolt.

All-wheel drive cars

 PERFORMANCE ORDER

  1. To lift the car in horizontal situation.
  2. If is available, to remove an engine and transmission guard.
  3. Visually to check a transmission on tightness.
  1. To turn out a verifying stopper (depending on the movement direction) from the forward party of a case of a transmission.
  1. Level of oil should be at height of a jellied opening. If necessary to add transmission oil.
  2. To establish a verifying stopper with new laying and to tighten with effort of 55 Nanometers.
  3. If is available, to establish an engine and transmission guard.
  4. To lower the car.