Mazda 323

since 1985 of release

Repair and car operation



Mazda 323

- Introduction
   About this Management
   Mazda-323 brand cars — the introduction
   Identification numbers of the car
   Acquisition of spare parts
   Technology of service, tools and workplace equipment
   Engine start from an auxiliary source
   Poddomkrachivaniye and towage
   Automobile himikaliya, oils and greasings
   Diagnostics of malfunctions
   Routine maintenance
   - Works on maintenance
      Oil replacement
      Replacement of the oil filter
      Replacement of the perepuskny oil filter
      Visual check on leakage of oil
      Check of level of engine oil
      Check of level of cooling liquid
      Replacement of cooling liquid
      Visual check of tightness of system of cooling
      Frost resistance check
      Adjustment of gaps of valves
      Pulling up of bolts of a head of cylinders
      Pulling up of bolts of inlet and final collectors
      Check of the sensor of provision of a butterfly valve
      Check of the moment of ignition
      Replacement of candles ignition/check of electric contacts
      Replacement of an element of the air filter
      Plums of a sediment of the fuel filter diesel engine/replacement of the fuel filter
      Check maple belt/tension/replacement of a gear belt
      Visual check of system of production of the fulfilled gases
   + Box transfers/drive of wheels
   + brakes/tyres/wheels
   + Steering management/drive of forward wheels
   + car Electric equipment
   + Body / internal equipment
+ Petrol engines
+ System of greasing of the engine
+ System of cooling of the engine
+ ignition System
+ Power supply system, carburetor, system of injection of fuel
+ Diesel engine
+ System of production of the fulfilled gases
+ Coupling
+ Manual transmission
+ Automatic transmission
+ Suspension bracket and steering system
+ Brake system
+ Wheels and tires, body, car coloring, care of the car
+ electric equipment System
+ Heater, lighting system, devices
+ Governing bodies and operation receptions
+ Electric circuits




Replacement of an element of the air filter

The special tool is not required. The following spare details should be bought:

    Element of the air filter. Upon purchase of a filtering element it is necessary to pay attention that the element according to model of the car and engine capacity is required.

The element of the air filter should not be blown by the compressed air.

Carburetor engine

Removal

 PERFORMANCE ORDER

    To unscrew a lambskin nut and to weaken brackets. To uncover and take out filtering element.

Installation

 PERFORMANCE ORDER

    To enclose filtering element. To put on a cover, to latch brackets and to screw a lambskin nut.

Injector engine

Removal

 PERFORMANCE ORDER

    To weaken a shlangovy collar and to disconnect an inlet air hose.
    To unscrew bolts of fastening of the top part of the air filter.
    To remove the top part of the air filter.
    To take out filtering element. To wipe the filter case a rag.

Installation

 PERFORMANCE ORDER

    To enclose a new element in the case of the air filter. To establish and screw the top part. To connect an inlet hose and to fix it a collar.

Diesel engine

Removal

 PERFORMANCE ORDER

    To weaken a collar and to disconnect an inlet air hose.
    To unscrew bolts of fastening of a cover of the air filter. To wipe the filter case a rag.

Installation

 PERFORMANCE ORDER

    To enclose a new element in the case of the air filter. To establish and screw a cover. To connect an inlet hose and to fix it a collar.