Mazda 323

since 1985 of release

Repair and car operation

Mazda 323

- Introduction
   About this Management
   Mazda-323 brand cars — the introduction
   Identification numbers of the car
   Acquisition of spare parts
   Technology of service, tools and workplace equipment
   Engine start from an auxiliary source
   Poddomkrachivaniye and towage
   Automobile himikaliya, oils and greasings
   Diagnostics of malfunctions
   Routine maintenance
   - Works on maintenance
      Oil replacement
      Replacement of the oil filter
      Replacement of the perepuskny oil filter
      Visual check on leakage of oil
      Check of level of engine oil
      Check of level of cooling liquid
      Replacement of cooling liquid
      Visual check of tightness of system of cooling
      Frost resistance check
      Adjustment of gaps of valves
      Pulling up of bolts of a head of cylinders
      Pulling up of bolts of inlet and final collectors
      Check of the sensor of provision of a butterfly valve
      Check of the moment of ignition
      Replacement of candles ignition/check of electric contacts
      Replacement of an element of the air filter
      Plums of a sediment of the fuel filter diesel engine/replacement of the fuel filter
      Check maple belt/tension/replacement of a gear belt
      Visual check of system of production of the fulfilled gases
   + Box transfers/drive of wheels
   + brakes/tyres/wheels
   + Steering management/drive of forward wheels
   + car Electric equipment
   + Body / internal equipment
+ Petrol engines
+ System of greasing of the engine
+ System of cooling of the engine
+ ignition System
+ Power supply system, carburetor, system of injection of fuel
+ Diesel engine
+ System of production of the fulfilled gases
+ Coupling
+ Manual transmission
+ Automatic transmission
+ Suspension bracket and steering system
+ Brake system
+ Wheels and tires, body, car coloring, care of the car
+ electric equipment System
+ Heater, lighting system, devices
+ Governing bodies and operation receptions
+ Electric circuits

Visual check of tightness of system of cooling


    To check hoses of cooling liquid on existence of the cracks, the hardened hoses to replace. Hoses should be put on unions rather deeply. To check durability of landing of shlangovy collars. If necessary to establish instead of former tightening collars screw collars. If level of cooling liquid often falls, and it is not possible to define a place of leak, to make check on the warm engine. For this purpose to warm up the engine and to leave to idle, while the fan will turn on. To watch thus, whether cooling liquid in the field of the water pump acts. Obvious loss of cooling liquid and/or availability of oil in cooling liquid, and also at the warm engine indicate a white exhaust cloud defect of laying of a head of cylinders.

If a place of leak to find it is not possible, recommended to make check under pressure, see. Section Check of tightness of system of cooling. Thus it is possible to check also perepuskny the cover valve.