Mazda 323

since 1985 of release

Repair and car operation

Mazda 323

- Introduction
   About this Management
   Mazda-323 brand cars — the introduction
   Identification numbers of the car
   Acquisition of spare parts
   Technology of service, tools and workplace equipment
   Engine start from an auxiliary source
   Poddomkrachivaniye and towage
   Automobile himikaliya, oils and greasings
   Diagnostics of malfunctions
   Routine maintenance
   - Works on maintenance
      Oil replacement
      Replacement of the oil filter
      Replacement of the perepuskny oil filter
      Visual check on leakage of oil
      Check of level of engine oil
      Check of level of cooling liquid
      Replacement of cooling liquid
      Visual check of tightness of system of cooling
      Frost resistance check
      Adjustment of gaps of valves
      Pulling up of bolts of a head of cylinders
      Pulling up of bolts of inlet and final collectors
      Check of the sensor of provision of a butterfly valve
      Check of the moment of ignition
      Replacement of candles ignition/check of electric contacts
      Replacement of an element of the air filter
      Plums of a sediment of the fuel filter diesel engine/replacement of the fuel filter
      Check maple belt/tension/replacement of a gear belt
      Visual check of system of production of the fulfilled gases
   + Box transfers/drive of wheels
   + brakes/tyres/wheels
   + Steering management/drive of forward wheels
   + car Electric equipment
   + Body / internal equipment
+ Petrol engines
+ System of greasing of the engine
+ System of cooling of the engine
+ ignition System
+ Power supply system, carburetor, system of injection of fuel
+ Diesel engine
+ System of production of the fulfilled gases
+ Coupling
+ Manual transmission
+ Automatic transmission
+ Suspension bracket and steering system
+ Brake system
+ Wheels and tires, body, car coloring, care of the car
+ electric equipment System
+ Heater, lighting system, devices
+ Governing bodies and operation receptions
+ Electric circuits

Frost resistance check

The following tool is necessary:

    The verifying probe which is available on sale and put at disposal on gas stations.


    Regularly before the beginning of a winter season it is necessary to check concentration of antifrizny means, especially if pure water before was added. To warm up the engine while the top hose of cooling liquid to a radiator will not heat up to hand temperature.
    Carefully to open a cover of a compensatory tank.
    To gather cooling liquid in a measuring probe and to take readings of a probe float. At width of Germany frost resistance should be to - 26°С, in areas with very frigid climate to - 40°С.

Dolivka of an antifrizny concentrate

To use only firm means on an etilenglikolevy basis with anticorrosive qualities. The Antifrizny concentrate should be suitable for aluminum details of system of cooling. It is impossible to use an antifrizny concentrate on a spirit basis.

The measured value в°С 0 - 5 - 10 - 15
Difference in liters
Е1, ЕЗ, Е5 2, 0 1, 5 1, 0 0, 6
VZ, В5, В6, VR mechanical transmission 2, 0 1, 5 1, 0 0, 6
VZ, В5, В6, VR automatic transmission 2, 5 2, 0 1, 5 1, 0
PN 2, 5 2, 0 1, 5 1, 0


    To close a cover on a broad tank and after a trial trip once again to check frost resistance.