Mazda 323

since 1985 of release

Repair and car operation



Mazda 323

+ Introduction
+ Petrol engines
+ System of greasing of the engine
+ System of cooling of the engine
+ ignition System
- Power supply system, carburetor, system of injection of fuel
   Purity rules at work with a power supply system
   Removal and sensor installation/check in a fuel tank
   Removal and installation of a fuel tank
   Removal and installation of the fuel pump
   Removal and installation/check of the fuel pump
   Removal and installation of the air filter
   + Carburettor
   - System of injection of fuel
      System of injection of fuel
      Memory of malfunctions
      Security measures at work with injection system
      Idling check
      Verification of the contents WITH
      Check/adjustment of the sensor of a butterfly valve
      Removal and installation/check of the sensor of temperature of cooling liquid
      Check of gates of injection (injectors)
      Removal and installation of gates of injection
      Check of the fuel pump
+ Diesel engine
+ System of production of the fulfilled gases
+ Coupling
+ Manual transmission
+ Automatic transmission
+ Suspension bracket and steering system
+ Brake system
+ Wheels and tires, body, car coloring, care of the car
+ electric equipment System
+ Heater, lighting system, devices
+ Governing bodies and operation receptions
+ Electric circuits






Security measures at work with injection system

  • Not to start the engine if the battery is connected insufficiently reliably.
  • Not to apply to engine start the fast-charger.
  • Never to disconnect the battery from an onboard network on the working engine.
  • At a fast charging to disconnect the battery from an onboard network.
  • Before check of system of injection it is necessary to be convinced that the system of ignition is serviceable.
  • At temperatures above +80°С to remove a monitor.
  • To watch faultless connection of sockets.
  • Not to disconnect and not to connect the monitor tip at the included ignition.
  • At check of a compression and for pressure decrease of fuel it is necessary to disconnect current giving on the fuel pump, to disconnect the tip. The tip is under a back seat. To remove a back seat, see. Head of the Wheel and tire, body, car coloring, care of the car.