Mazda 323

since 1985 of release

Repair and car operation



Mazda 323

+ Introduction
+ Petrol engines
+ System of greasing of the engine
+ System of cooling of the engine
+ ignition System
+ Power supply system, carburetor, system of injection of fuel
+ Diesel engine
+ System of production of the fulfilled gases
+ Coupling
+ Manual transmission
+ Automatic transmission
+ Suspension bracket and steering system
+ Brake system
+ Wheels and tires, body, car coloring, care of the car
- Electric equipment system
   Search of malfunctions of electric system
   Switch check on a current transmission
   Relay check
   Check of the motor of a screen wiper
   Verification of indexes of turn
   Check of stoplights
   Check of a heater of back glass
   Separation and connection of cable tips
   Arrangement of safety locks
   Replacement of safety locks
   Removal and battery installation
   Battery check
   The battery is discharged in itself
   Battery charging
   Battery storage
   Generator
   Security measures for the generator of an alternating current
   Check of tension of the generator
   Removal and generator installation
   Generator components
   Dismantling generator/replacement of coal brushes
   Removal and starter installation
   Check/replacement of the traction relay of a starter
+ Heater, lighting system, devices
+ Governing bodies and operation receptions
+ Electric circuits




Check of a heater of back glass

 PERFORMANCE ORDER

    At the included heater of back glass the field with visible conductors should be released after a while from a precipitation or ice. At malfunction at first to check a safety lock in a box of safety locks. If the safety lock is serviceable, to check durability of landing of the tip at the left and on the right on back glass, if necessary to clear of corrosion. If the heater does not work, to check wires to the switch, see. Head electric equipment System. To check operation of the switching relay, see. Section relay Check.
    If the conductor of a heater has break, will help out a standard silvery current-carrying varnish. For this purpose to clear area of repair by a thinner or ethylene.
    To glue a break place from both parties a sticky tape and to put with a thin brush silvery paint. Let's to paint dry 24 hours at temperature +25°С. It is possible to use also the hair dryer with hot air. At temperature +150°С paint dries 30 minutes.

Not to include a heater of back glass, paint will not dry yet. Not to apply to cleaning gasoline or other solvents.