Mazda 323

since 1985 of release

Repair and car operation



Mazda 323

+ Introduction
+ Petrol engines
+ System of greasing of the engine
+ System of cooling of the engine
+ ignition System
+ Power supply system, carburetor, system of injection of fuel
+ Diesel engine
+ System of production of the fulfilled gases
+ Coupling
+ Manual transmission
+ Automatic transmission
+ Suspension bracket and steering system
+ Brake system
+ Wheels and tires, body, car coloring, care of the car
- Electric equipment system
   Search of malfunctions of electric system
   Switch check on a current transmission
   Relay check
   Check of the motor of a screen wiper
   Verification of indexes of turn
   Check of stoplights
   Check of a heater of back glass
   Separation and connection of cable tips
   Arrangement of safety locks
   Replacement of safety locks
   Removal and battery installation
   Battery check
   The battery is discharged in itself
   Battery charging
   Battery storage
   Generator
   Security measures for the generator of an alternating current
   Check of tension of the generator
   Removal and generator installation
   Generator components
   Dismantling generator/replacement of coal brushes
   Removal and starter installation
   Check/replacement of the traction relay of a starter
+ Heater, lighting system, devices
+ Governing bodies and operation receptions
+ Electric circuits




Check of the motor of a screen wiper

The motor of a screen wiper is in a water-proof casing under a windscreen, the motor of a back screen wiper is in a back door. For check the corresponding facing should be removed. The motor of a forward screen wiper will be considered further, with a back screen wiper to arrive as appropriate.

Check of a forward screen wiper

 PERFORMANCE ORDER

    At first to find out, whether the motor of a cleaner or tension giving is faulty. For this purpose to operate as follows. To disconnect the multicontact tip on the screen wiper motor.
From 10/89 g вып.
    Tax by means of an auxiliary cable tension from a plusovy pole of the battery on the page plug. (The minus pole of the motor is connected to a battery minus through a body). The motor of a screen wiper should work now at the 1st step (slowly). If it does not work, means, the motor or the 1st step is faulty. To connect a plusovy cable to the plug and to the left of the page plug. The motor should work now quickly at the 2nd step.

Check of a back screen wiper

 PERFORMANCE ORDER

    To connect a plusovy cable of the battery to the plug A, and weight to the plug B of the tip and to check, whether the motor works.
    Then to disconnect weight from the plug B and at once to connect to the motor case. The motor should finish before situation останова and stop.
 9/85-9/89 вып.
    To submit an auxiliary cable tension from a plusovy pole of the battery on the plug b. Weight from a minus pole of the battery to connect to the plug and. The plug b is at the left below, the plug and on the right below. The motor of a screen wiper should work at the 1st step (slowly). If it does not work, means, the motor or the 1st step is faulty.
    To connect a minus cable to the page plug. The plug with is over the plug and. The motor should work now at the 2nd step (quickly).

Check of a back screen wiper

 PERFORMANCE ORDER

    To connect a plusovy cable of the battery to the plug and, a weight cable to the plug b of the tip and to check, whether the engine works. Then to remove weight from the plug b and at once to connect to the motor case. The motor should finish before situation останова and stop. If the motor of a screen wiper works incorrectly, to establish new, see. Head Heater, lighting system, devices, Section Removal and installation of the motor of a back screen wiper. To connect the tip of the motor of a forward screen wiper.