Mazda 323

since 1985 of release

Repair and car operation



Mazda 323

+ Introduction
+ Petrol engines
+ System of greasing of the engine
+ System of cooling of the engine
+ ignition System
+ Power supply system, carburetor, system of injection of fuel
+ Diesel engine
+ System of production of the fulfilled gases
+ Coupling
+ Manual transmission
+ Automatic transmission
+ Suspension bracket and steering system
+ Brake system
+ Wheels and tires, body, car coloring, care of the car
- Electric equipment system
   Search of malfunctions of electric system
   Switch check on a current transmission
   Relay check
   Check of the motor of a screen wiper
   Verification of indexes of turn
   Check of stoplights
   Check of a heater of back glass
   Separation and connection of cable tips
   Arrangement of safety locks
   Replacement of safety locks
   Removal and battery installation
   Battery check
   The battery is discharged in itself
   Battery charging
   Battery storage
   Generator
   Security measures for the generator of an alternating current
   Check of tension of the generator
   Removal and generator installation
   Generator components
   Dismantling generator/replacement of coal brushes
   Removal and starter installation
   Check/replacement of the traction relay of a starter
+ Heater, lighting system, devices
+ Governing bodies and operation receptions
+ Electric circuits






Removal and generator installation

Petrol engine

Removal

 PERFORMANCE ORDER

  1. To disconnect a weight cable from the battery.

Data from memory of malfunctions of the engine or protective code of a radio receiver are thus erased. Before shutdown of the battery it is necessary to read instructions in the Section Removal and battery installation.


  1. To disconnect the multicontact tip-2-behind the generator.
  1. To unscrew the main cable-3-from the plug B.
  2. To remove maple a belt, see. Head Petrol engines, Section Removal and installation/tension of a maple belt.
  3. To unscrew bolts on a generator arm, and also on a tension bracket and to remove the generator.

Installation

 PERFORMANCE ORDER

  1. To insert the generator and to screw on an arm, without tightening finally.
  2. To insert a tension bolt.
  3. To check wear of a maple belt, if necessary to replace.
  4. To impose and pull maple a belt, see. Head Petrol engines, Section Removal and installation/tension of a maple belt.
  5. To tighten a fastening bolt with effort of 50 Nanometers, a tension bolt with effort of 25 Nanometers.
  6. To connect to the generator electric wires.
  7. To connect a weight cable to the battery.
  8. If are available, to establish time on hours and to set a protective code of a radio receiver.

Diesel engine

Removal

 PERFORMANCE ORDER

  1. To disconnect a weight cable from the battery.

Data from memory of malfunctions of the engine or protective code of a radio receiver are thus erased. Before shutdown of the battery it is necessary to read instructions in the Section Removal and battery installation.

  1. To lift a forward part of the car, see. Head Introduction.
  1. To unscrew a reception pipe of the exhaust silencer.
  1. To disconnect vacuum hoses-2-, previously having weakened and having shifted collars.
  1. To disconnect oil hoses-3-. To collect following oil. To cover surrounding details with a rag.
  2. To disconnect the multicontact tip-5-behind the generator.
  3. To unscrew the main cable-4-from the plug B.
  4. To remove maple a belt-6-, see. Head Petrol engines, Section Removal and installation/tension of a maple belt.
  5. To unscrew bolts on a generator arm, and also on a tension bracket and to take out the generator-7-down.

Installation

 PERFORMANCE ORDER

  1. To insert the generator and to screw on an arm, without tightening finally.
  2. To insert a tension bolt.
  3. To check wear of a maple belt, if necessary to replace.
  4. To impose and pull maple a belt, see. Head Petrol engines, Section Removal and installation/tension of a maple belt.
  5. To tighten a fastening bolt with effort of 50 Nanometers, a tension bolt of c effort of 25 Nanometers.